Designed in BrisbaneFree AU shipping over A$99Orders are open

NOMAE

Instructions

Set up your tracker.

  1. 01

    Plug it in.

    Use the USB-C cable and a standard 5 V USB power source to wake it.

  2. SET UP Plug in your tracker Tracker foundPair
    02

    Pair in the app.

    Turn on Bluetooth, open Settings → Tracker and follow the pairing prompts.

    Get the app

    1. Install Apple’s free TestFlight app from the App Store. 2. Open the NOMAE link on your iPhone and tap Accept, then Install.

Waking it

It sleeps when nobody's using it. Pick it up or give it a shake to wake it, or just put it on a machine. Plugging it in wakes it too. It then stays awake long enough to open the app.

Putting it on a machine

Unplug it first. Hold it to the side of the top plate on the moving weight stack of a selectorised machine; then check the attachment is secure. Check it holds before every set. Keep it clear of guide rods, pins, pulleys and cables. If it rocks or slides, remove it. Do not use that position. Not for free weights.

Charging

Any USB-C cable and a standard 5 V USB charger. Take it off the machine first; never charge it while it's on one.

Safety and care

Keep it dry and wipe it with a soft dry cloth. Don't open, crush, puncture, bend or heat it. Stop using or charging it if it gets unusually hot, swells, smells odd or is damaged, and contact support. Keep the magnets away from implanted medical devices and anything sensitive to magnets. Follow your gym's rules and the machine maker's safety instructions.

Something not right?

App can't find it: pick it up or give it a shake (or plug it in), turn on Bluetooth and try from Settings → Tracker. Missed or extra rep: fix the set with + or −. Anything else: Help or support@nomae.com.au.

The tracker is still being finalised. These instructions are a preview; follow the instructions supplied with your finished device. A secure attachment alone does not establish counting accuracy.